[Information] Chunk Loaders

Discussion in 'Wiki' started by NotTooSlick, Sep 25, 2017.

  1. NotTooSlick

    NotTooSlick SrAdvisor Staff Member SrAdvisor

    Joined:
    Jun 5, 2017
    Messages:
    161
    Likes Received:
    17
    Gender:
    Male
    Location:
    Everywhere
    We have a custom chunk loader system other than modded loaders. Our chunk loaders can either be purchased from the token shop or the store. There is a deference between them which will be explained below. Chunk loaders are bought in chunks. You buy x chunks, therefore you can load x chunks. Chunks are loaded by perimeter. For example, lets say you buy 9 chunks, it will load a 3x3 area around the chunk loader (the loader being in the middle).

    To check how many chunk loader chunks you have do
    /bcl bal this displays both online and always on chunk loaders.


    Token Shop Chunk Loader:

    The token shop chunk loaders are chunk loaders that only work when the chunk loader owner is online. These chunk loaders are known as "Online Chunk Loaders". To use an Online Chunk Loader, you need to buy it first, and then you place down an iron block. After placing the block in the area of the chunks you want loaded (depending on how many chunks you buy), you right click it with a blaze rod and select the amount of chunks to load.

    Store Chunk Loaders:

    The store chunk loaders are online 24/7. These chunk loaders are known as "Always Online Chunk Loaders". The loader automatically deactivates (gets disabled until you come back one, you do not lose the chunk loader chunk) when the owner of the island becomes inactive for more than 3 days. These chunk loaders are strictly for the store because they are so resource heavy, and if we enabled these to be bought with tokens then all the servers would get severe lag. To activate an Always Online Chunk Loader, you must place down a diamond block. After placing the block in the area of the chunks you want loaded (depending on how many chunks you buy), you right click it with a blaze rod and select the amount of chunks to load.

    How to Remove or Change the Chunks of a Chunk Loaders:

    To remove a chunk loader you must right click the iron or diamond block with a blaze rod, and then you click on the redstone torch. This gives you the chunks back, and will permit you to break the block without losing any chunks. DO NOT remove the block without disabling the loader or you will risk losing the chunk.
    To change the amount of chunks a chunk loader is holding, remove the chunk loader first and then chose the new amount of chunks you want it to load.
    DO NOT change the chunks without disabling the loader or you will risk losing the chunk.

    Note: We do not provide the blaze rods or the iron/diamond blocks required for the chunk loader.
     
    Last edited: Nov 9, 2017

Share This Page